The Ultimate Guide to Sending Cards for LED Video Processors

This is a general guide to installing an Sending Card into an LED Video Processor. The video processor is VDwall LVP615S, the Sending card is NovaStar MSD300. Similar LED Video Controller kit items we can provide free installation service for customers, buyers can use out of the box.

LED Video Processor
VDwall:LVP615,LVP605,LVP100U,LVP300,SC-4,SC-12,LVP515,LVP909
Magnimage: LED-550DS,LED-580F
RGBlink:GX4Pro

LED Sending Card
NovaStar: MSD300-1
Linsn: TS802D
Colorlight: S2
Kystar: S2

Steps to Install an LED Sending Card into an LED Video Processor:

1. Power Off the Equipment:

   • Ensure both the LED video processor and the sending card are powered off and disconnected from any power sources to prevent electrical hazards.​

2. Open the Video Processor's Enclosure:

   • Carefully remove the screws or fasteners securing the processor's cover to access the internal slots designated for expansion cards.
     
     

3. Identify the Appropriate Slot:

   • Locate the PCIe or designated slot compatible with the sending card within the processor. Refer to the processor's user manual for exact slot specifications.
     

4. Insert the Sending Card:

   • Align the sending card's connector with the slot, ensuring correct orientation. Gently but firmly press the card into the slot until it is securely seated.
     

5. Secure the Card:

   • Use screws or retaining clips to fasten the sending card to the processor's chassis, preventing movement or disconnection.
     

6. Reconnect and Power On:

   • Replace the processor's cover and secure it. Reconnect all necessary cables and power on the equipment.​

7. Configure the System:

   • Install any required drivers or software for the sending card. Configure the video processor settings to recognize and utilize the newly installed card.
     

Additional Resources:

For visual guidance, you might find the following tutorial helpful:

• How to Install an LED Sending Card into a Video Processor: YouTube Tutorial

For more information about specific tutorials,, search for relevant videos on platforms like YouTube.

Important Considerations:

• Always consult the user manuals of both the LED video processor and the sending card for model-specific instructions and compatibility information.​

• If you're uncertain about any step in the installation process, it's advisable to seek assistance from a qualified technician or contact the manufacturer's customer support.​

By following these general steps and referring to manufacturer guidelines, you should be able to successfully install an LED sending card into an LED video processor.