What are the installation methods of LED display?
LED electronic display screen due to industry use environment does not have to, its device method is different. Generally speaking indoor LED screen device methods generally have: inlaid device, wall-mounted device, wall-mounted device, etc.; Field LED electronic screen to column device and roof type device is more common.
1, inlaid device: suitable for small indoor electronic screen. As the device space is small, in order not to take up space, according to the size of the screen area in the wall dug out the same size of the area, the LED electronic screen embedded in the wall. Requirements for the wall is a solid wall. Selected before the protection method, the cost is higher. Field device, then, mounted structure is suitable for planning in the building planning has now been incorporated into the electronic screen project, in the civil engineering project construction in advance to reserve space for the installation of the display, the practice of installations only need to manufacture electronic screen steel structure will be set in the electronic screen in the construction of the wall, the back of the back to meet the protection of the space.
2, wall-mounted device: more for indoor LED display device, area is small (10 square meters), the wall is required to solid wall, hollow brick or simple partition wall are not suitable for this device.
3, hanging device: more for station LED display, airport LED display and other large places to play the effect of signage. Requirements screen area is small. (10 square meters or less) Requirements are necessary to have a suitable device address, such as above the beam or beam, and the screen body in general to add the back cover.
General mounting for the total weight of the screen less than 50kg single box electronic screen, can be hung directly on the bearing wall, without having to reserve space for repair, the electronic screen box selection of front protection planning, repair of the electronic screen from the bottom can be lifted.
Rack mounted for general field display, taking into account the difficulty of display protection, the screen and the wall between the use of steel structural support, 800mm of space reserved for repair, the space is equipped with horse path, ladder and other repair equipment, and the installation of power cabinets, air conditioning, axial fans, lighting and other auxiliary equipment.
4, column type device: mostly used for field LED display screen installation, wide-open vision, around the more open places, such as squares, parking lots. According to the size of the screen area can be divided into single column and double column type device. Column mounted suitable for open space on the LED display device, the field display device on the column. Column type in addition to the need to manufacture the steel structure of the screen, but also need to manufacture concrete or steel columns, the primary consideration of the geological situation of the foundation.
5, roof type device: the primary applicable to the field LED display, device address is the roof of the building, with the height of the building to consider the wind level should be added.
