Novastar Mctrl series is a main
LED controller, which includes
Mctrl300, Mctrl500,
Mctrl600, Mctrl660, Mctrl660 Pro,
Mctrl700,
Mctrl4K, and MctrlR5. Compared with the most basic sending card, it can run without the computer. Then this type of
LED display controller is like an industrial computer, and the sending card is built into it.
The sending card of the LED display screen is mainly connected using a network cable. The sending card functions like a graphics card and is responsible for converting the image and video simulation into a dot matrix model and sending it to the
LED receiving card.
LED sending cards usually only have two models, such as MSD300-1 and MSD600-1. The corresponding network port outputs are 2 and 4. The
LED display sending box is distinguished according to the output network port.
Mctrl300 is similar to
MSD300-1 and has two network port outputs. The network port output is affected by the physical parameters of the data line output and is 650,000 pixels. Then the loading capacity of Mctrl is 1.3 million pixels.
Mctrl500 is the same generation product between Mctrl300 and Mctrl600. It has the nature of an enhanced version with four network port outputs. At the same time, it is also equipped with an additional optical fiber port. It is better than Mctrl600 in terms of configuration. Its carrying capacity is 2.6 million pixels, which is equivalent to a 1K frame.
Mctrl600 is a standard four-network port output, which is equivalent to MSD600-1. Its load capacity is 2.6 million pixels, which is twice that of Mctrl300.
Mctrl700 appeared later than Mctrl600. It is an optimized product with high load capacity and cascade mode of up to 20 units. It is also equipped with an HDMI interface, seven network port outputs, and a loading capacity of up to 3.9 million pixels.
Mctrl660 adds a circuit based on Mctrl600, which also means it has a backup function and safer playback control. The loading capacity is the same as Mctrl600, but the image quality processing has been enhanced.
Mctrl660 Pro is a flagship product. The design not only adds optical fiber ports and HDMI, but also has a beautiful appearance. It also uses a lockable aviation network port plug for the output network port. Carrying 2.3 million pixels, it is mainly aimed at people who pursue high-definition picture quality and low latency.
Mctrl4K is a near-perfect product, whether it is fine workmanship or data transmission, it has everything you can use. It has 16 network port outputs, supports optical fiber transmission, and has 4K load capacity. As the format of LED displays becomes larger and larger, 3D displays develop. It is also getting more use,
MctrlR5 is used in special scenes, such as rotating LED screens and backgrounds composed of special-shaped panels.
