How to improve the working stability of LED display?
Improve the stability of the work is mainly in the maintenance of the above efforts.
Requirements for power supply stability, and grounding protection is good, do not use in poor natural conditions, especially strong lightning weather. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause harm to the full-color display screen away from the screen, and clean the screen as gently as possible to wipe, minimize the possibility of injury. Turn off the LED display first, then turn off the computer.
Maintain the humidity of the environment in which your full color LED display screen is being used, and don't allow anything of a humid nature to enter your full color LED display screen. Adding power to a full color display large screen that contains humidity can cause corrosion of the full color display parts, which in turn can cause permanent damage.
If water enters the screen for any reason, immediately disconnect the power and contact a repair person until the display board inside the screen is dry before use.
LED display switching sequence:
A: first turn on the control computer so that it can operate normally and then turn on the LED display screen.
B: It is recommended that the LED display screen daily rest time is greater than 2 hours, in the rainy season LED screen screen a week at least use more than once. General at least once a month to open the screen, light up more than 2 hours.
Do not play for a long time in the full white, full red, full green, full blue and other full bright screen, so as not to cause excessive current, excessive heating of the power cord, LED lamp damage, affecting the service life of the display.
Do not disassemble, splicing screen body! LED full color display screen and our users the closest relationship, do a good job of cleaning and maintenance work is also very necessary.
Prolonged exposure to the outdoor environment wind, sun, dust and other easy to show dirty, a period of time down, the screen is certainly a piece of dust, which needs to be cleaned in a timely manner in order to prevent dust for a long time wrapped around the surface to affect the viewing effect.
The led display screen surface can use alcohol to wipe, or use a brush, vacuum cleaner for dust removal, not directly with a wet cloth to wipe.
Led display screen need to regularly check whether the normal work, line has no damage, such as not working to be replaced in time, line has damage to be repaired or replaced in time. led display screen internal line, non-professionals are prohibited from touching, in order to avoid electrocution, or cause damage to the line; if there is a problem, please call a professional for overhaul.
