What are the installation methods for LED displays?
What are the installation methods for LED displays?
Friends who have contacted the LED display know that the LED display is made of one piece of LED module splicing. What we produce in the factory is a piece of LED module, and what customers need is a complete LED display to play the content they want to play, present the effect they want.
Many customers ask directly when they inquire, how to sell LED display? How much a square meter? And so on. And we are the first to ask, how is your installation site? Because, this involves a core issue, how to install the LED display corresponds to the internal structure, then different internal structure, naturally corresponds to a different cost price.
In this paper, I will specifically talk about the following four aspects of the LED display what installation methods.
First, simple magnetic suction
Simple magnetic structure is mainly used in indoor or semi-outdoor LED display, and screen installation places behind most of the walls or fixed points that can provide support structure.
The specific practice is, first welding (or self-tapping screws connected) a good metal structure of the LED display, and then screw the magnet on the back of each LED module, adsorption to the keel structure of the LED display, splicing into a complete LED display plane, and then connected to the back of the power and signal lines, and then debugging software, that is, to complete the installation of a simple magnetic structure of the LED display process.
This structure of low material costs, easy to operate, easy to install, in small and medium-sized LED display installation for the preferred program. The disadvantage is that the labor requirements are high, the display behind the line is complex, need professionals to install the production.
Second, simple box
Simple box is mostly used for large area LED display, in indoor and simple magnetic structure is similar to the cost of increasing the cost of a box, in the outdoor is much higher requirements, in the completion of the welding screen metal structure and connect the splicing LED display box, but also need to do waterproofing edge treatment.
This structure is simple to put together, in the installation of a large part of the elimination of wiring wiring labor, is the preferred outdoor LED big screen program.
But do outdoor big screen, its waterproof to manual operation requirements are very high, once the waterproof has a loophole, will directly lead to LED display behind the exposed wire moisture rust and easy to damage.
Third, die-casting aluminum Cabinets
Die-casting aluminum cabinets structure of the LED display screen is mostly used for rental screen. This kind of structure because of its splicing of high precision, die-casting aluminum material of lightweight, installation and dismantling simplicity, by the majority of customers unanimously loved and praised.
Of course, its cost is also linked to the price of aluminum, compared with the first two display screen structure cost is much higher. Its main structure is a high-precision die-casting aluminum metal structure, LED modules, power supplies, power lines, signal lines and so on, all assembled into a whole, the installation of the time as long as a complete box spliced together behind the day frame or welded metal structure is fixed, or lifting ring lifting, and so on, the box with the box between the only need to use the aviation plug line connection, installation is very simple and fast. After the assembly is completed, redraw the alignment diagram in the software and send the program to complete the debugging. And play if you want to disassemble and move position, disassembly is also very fast and convenient.
Die-casting aluminum cabinets structure and its advantages at a glance, LED display internal alignment structure is almost completely closed, the external only beautiful screen decent, even if the back is also clean, easy and fast splicing. The disadvantage is that the price is relatively high.
Four, outdoor waterproof box
Waterproof box, as soon as you hear the name, you know the application in the outdoors. This kind of structure is in the simple box structure on the basis of the back of the waterproof door, and because of the narrow space, generally have to add exhaust fans to build the internal cooling and ventilation cycle, all the internal corners of the seams to glue to do waterproof. Characterized by material costs than simple box a little more, but in the project installation site will not need to do waterproof process. Accumulated to the whole LED display unit price, because of labor costs, material costs add up, the whole cost is slightly more expensive than simple box.
Many customers ask directly when they inquire, how to sell LED display? How much a square meter? And so on. And we are the first to ask, how is your installation site? Because, this involves a core issue, how to install the LED display corresponds to the internal structure, then different internal structure, naturally corresponds to a different cost price.
In this paper, I will specifically talk about the following four aspects of the LED display what installation methods.
First, simple magnetic suction
Simple magnetic structure is mainly used in indoor or semi-outdoor LED display, and screen installation places behind most of the walls or fixed points that can provide support structure.
The specific practice is, first welding (or self-tapping screws connected) a good metal structure of the LED display, and then screw the magnet on the back of each LED module, adsorption to the keel structure of the LED display, splicing into a complete LED display plane, and then connected to the back of the power and signal lines, and then debugging software, that is, to complete the installation of a simple magnetic structure of the LED display process.
This structure of low material costs, easy to operate, easy to install, in small and medium-sized LED display installation for the preferred program. The disadvantage is that the labor requirements are high, the display behind the line is complex, need professionals to install the production.
Second, simple box
Simple box is mostly used for large area LED display, in indoor and simple magnetic structure is similar to the cost of increasing the cost of a box, in the outdoor is much higher requirements, in the completion of the welding screen metal structure and connect the splicing LED display box, but also need to do waterproofing edge treatment.
This structure is simple to put together, in the installation of a large part of the elimination of wiring wiring labor, is the preferred outdoor LED big screen program.
But do outdoor big screen, its waterproof to manual operation requirements are very high, once the waterproof has a loophole, will directly lead to LED display behind the exposed wire moisture rust and easy to damage.
Third, die-casting aluminum Cabinets
Die-casting aluminum cabinets structure of the LED display screen is mostly used for rental screen. This kind of structure because of its splicing of high precision, die-casting aluminum material of lightweight, installation and dismantling simplicity, by the majority of customers unanimously loved and praised.
Of course, its cost is also linked to the price of aluminum, compared with the first two display screen structure cost is much higher. Its main structure is a high-precision die-casting aluminum metal structure, LED modules, power supplies, power lines, signal lines and so on, all assembled into a whole, the installation of the time as long as a complete box spliced together behind the day frame or welded metal structure is fixed, or lifting ring lifting, and so on, the box with the box between the only need to use the aviation plug line connection, installation is very simple and fast. After the assembly is completed, redraw the alignment diagram in the software and send the program to complete the debugging. And play if you want to disassemble and move position, disassembly is also very fast and convenient.
Die-casting aluminum cabinets structure and its advantages at a glance, LED display internal alignment structure is almost completely closed, the external only beautiful screen decent, even if the back is also clean, easy and fast splicing. The disadvantage is that the price is relatively high.
Four, outdoor waterproof box
Waterproof box, as soon as you hear the name, you know the application in the outdoors. This kind of structure is in the simple box structure on the basis of the back of the waterproof door, and because of the narrow space, generally have to add exhaust fans to build the internal cooling and ventilation cycle, all the internal corners of the seams to glue to do waterproof. Characterized by material costs than simple box a little more, but in the project installation site will not need to do waterproof process. Accumulated to the whole LED display unit price, because of labor costs, material costs add up, the whole cost is slightly more expensive than simple box.
Shop the story