LED display Onbon control card software instructions for use

LED display Onbon control card software instructions for use

(1) Installation of “LedshowTW 2017” software installation is very simple, the operation is as follows: in your CD-ROM to find the file LedshowTW 2017.***.zip, unzip it and then double-click on the LedshowTW 2017***.exe. will enter the software installation wizard!

(2) Open the LedshowTW software on the desktop, and then click Software Settings, select Screen Parameter Setting, Password “168”, and enter the Screen Parameter Setting interface.

(3) The first step, the screen parameter settings to select the control card model, change the screen width and height, color. (Note: the finished LED in the aluminum profile of the screen has a label on the side of the label control card model, screen height, screen width, in the software to choose the corresponding can be.)


“If you use a USB flash drive to change the content, you do not need to change the communication mode, after selecting the parameters directly click on close.”

“If you use the network cable communication, after selecting the parameters, click Load Screen Parameter, click Load Scan Configuration, and then close it.”

Typing Instructions 1.1 Click on the subtitle 1.2 Make the subtitle area larger with the mouse to fill the preview box.

1.3 Then click on the subtitle at the bottom of the pop-up dialog box, type, change the font, and the size of the font, in the right side of the selection of the walking character effects can be (Note: If the text is more effects select the continuous left shift)

1.4 Finally, click the USB download option, click “Save”.

Insert the USB flash drive into the USB extension cable on the right side of the display to upload the text, and pull out the USB flash drive after the long transmission is successful.

Installation According to the site installation location, the installation of strong, beautiful, can not fall down.