How to change subtitles on LED display

LED display screen used in all walks of life, we live everywhere, but there is no lack of some just contact with the LED display screen friends, they are not quite understand the way to use the LED display screen. May also not know how to modify the LED display screen text, specifically how to set up, causing much confusion for them. Here is how to change the words on the LED display screen.

First of all, you need to know what way to change the text on the LED display screen, usually there are serial lines, U disk, cell phone (or remote control) these 3 ways. According to the corresponding mode of operation, you can operate on the LED display how to change the word.

1, through the network cable: the LED display and computer connection, open the display control software, the display will be set up, edit the font you want to display, click send on it, is not very simple?

2, U disk: there is a column in the software menu, click on the USB download, save the setup parameters and content to the U disk inside the hair can be. Change directly with the U disk copy content to get the full-color LED display can be replaced.

3, through the cell phone or remote control to change the word, edit the text message can be sent and change the advertising subtitles.

Tip: If there is no response to the text after changing, then there may be the following two main reasons:

Serial port connection line problems, use the control card software to detect whether it can be connected to the display, if connected on the general can, still can not be solved check whether the line is short-circuited.

U disk to change the word no response should check whether the U disk is a problem. Whether the control card software corresponds to. After confirming that the control card software is correct, format the USB flash drive and then import data.