The NovaStar AD20 is a new generation advertising player designed for full-color LED displays. It integrates playback and transmission functions, allowing program publishing and display control through various user terminals such as PCs, mobile phones, and tablets. It also supports access to cloud publishing and cloud monitoring platforms, enabling easy cross-regional cluster management of displays.
The NovaStar AD20 supports multi-screen splicing and both synchronous and asynchronous modes. With its features of security, stability, ease of use, and intelligent control, the NovaStar AD20 can be widely applied in LED advertising display splicing applications.
- Loading capacity up to 1,300,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
- 2x Gigabit Ethernet ports/4 x Gigabit Ethernet ports
These two ports serve as primary by default.
Users can also set one as primary and the other as backup.
- 1x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
- 1x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
Input
- 1x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
- 2x sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
- 1x USB 3.0 (Type A) port
Allows for playback of content imported from a USB drive and firmware upgrade over USB.
- 1x USB (Type B) port
Reserved
- 1x Gigabit Ethernet port
Connects to a LAN, public network, or computer for content publishing and screen control.
Performance
- Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video
decoding
− 1 GB of onboard RAM
− 32 GB of internal storage
- Flawless playback
1x 4K video playback or 2x 1080p video
playback
Function
- All-round control plans
− Enables users to publish content and
control screens from a computer, mobile
phone, or tablet.
− Allows users to publish content and control
screens from anywhere, anytime.
− Allows users to monitor screens from
anywhere, anytime.
- Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal connects to the built-in Wi-Fi hotspot of the TB50. The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678”.
− In Wi-Fi STA mode, the user terminal and
the TB50 are connected to the Wi-Fi
hotspot of a router.
- Synchronous and asynchronous modes
− In asynchronous mode, the internal video
source works.
− In synchronous mode, the video source
input from the HDMI connector works.
- Synchronous playback across multiple screens
− NTP time synchronization
− GPS time synchronization (The specified
4G module must be installed.)
- Support for 4G modules
The TB50 ships without a 4G module. Users
have to purchase 4G modules separately if
needed.
Network connection priority: Wired network > WiFi network > 4G network
When multiple types of networks are available, the TB50 will choose a signal automatically according to the priority.
AD20 LED Screen Multimedia Player Controller Card
AD20 of the Taurus series products feature following advantages, better satisfying users` requirements:
Loading capacity up to 1,300,000 pixels.
•Synchronous playback across multiple screens
•Powerful processing capability
•All-round control plans
•Wi-Fi AP and Wi-Fi Sta can be turned on at the same time
•Redundant backup
Further Information:
AD20
Novastar AD20 LED Screen Multimedia Player Controller Card Specification
