LED display maintenance tips
LED display maintenance tips
Influence the use of outdoor LED display factors have more, do not take good care of will greatly shorten the life of the LED display problems will be more, on the one hand, the savings control production costs, in the use of materials on the reduction to the aging rate in advance; on the other hand is the use of the customer deviates from the normal operation of the cause. The following by shenzhen LED display manufacturers tell you to maintain several tips.
01. Avoid chemical or physical damage
Active protection and passive protection, as far as possible to avoid chemical or physical damage to the LED display.
02. Protect the display in the right temperature and humidity
Guarantee the use of LED display environment at the right temperature and humidity, humidity is too large full-color display in the case of power, will lead to corrosion of LED display parts, resulting in permanent damage.
03.LED display power supply must be stable power supply must be stable, and good grounding protection. Try to avoid using the display in poor natural conditions, especially strong lightning weather.
04. Screen body is strictly prohibited into the water, iron powder and other easily conductive substances
Strictly prohibit the screen into the water, iron powder and other easily conductive substances. If for various reasons into the water, please immediately disconnect the power and contact the maintenance personnel until the screen body display board dry before use.
05. Do a good job of cleaning and maintenance
LED display surface can be wiped with alcohol, or use a brush, vacuum cleaner for dust removal, not directly with a wet cloth. Do a good job of cleaning and maintenance is also very necessary. If the display is exposed to wind, sun or dust for a long time, a period of time down, the screen may be a piece of dust, which needs to be cleaned in a timely manner to prevent dust, so as not to affect the viewing effect. When cleaning the screen also need to wipe as gently as possible to minimize the possibility of injury to the screen.
06. Regularly check whether the display is working properly
LED display need to regularly check whether the normal work, the line is not damaged. If not work to be replaced in a timely manner, the line is damaged to be repaired or replaced in a timely manner. LED display internal lines, non-professionals are prohibited from touching, to avoid electric shock, or cause line damage; if there is a problem, please shenzhen LED display manufacturers professionals to overhaul.
07. According to the LED display switching order of operation
Warmly recommend the correct switching order: first open the control computer so that it can operate normally and then open the LED display screen. First close the LED display, and then close the computer.
08. Reasonable arrangement of LED display rest time
It is recommended to reasonably arrange the rest time of the LED display, do not overwork. In the rainy season, the LED display at least one week to use more than once; other times of the month to open the screen at least once, lit more than 2 hours.
09. Avoid letting the display for a long time in the bright screen
Do not play for a long time in all white, all red, all green, all blue and other bright screen, so as not to cause excessive current, power line heating, LED lamp damage, affecting the service life of the display.
10. Do not arbitrarily cut off the power supply
Do not cut off the power supply at will, and do not frequently turn off and on the display power supply. Do not disassemble and splice the screen body without authorization!
Maintenance LED display is the need for continuous inspection, maintenance and maintenance to improve product life.
01. Avoid chemical or physical damage
Active protection and passive protection, as far as possible to avoid chemical or physical damage to the LED display.
02. Protect the display in the right temperature and humidity
Guarantee the use of LED display environment at the right temperature and humidity, humidity is too large full-color display in the case of power, will lead to corrosion of LED display parts, resulting in permanent damage.
03.LED display power supply must be stable power supply must be stable, and good grounding protection. Try to avoid using the display in poor natural conditions, especially strong lightning weather.
04. Screen body is strictly prohibited into the water, iron powder and other easily conductive substances
Strictly prohibit the screen into the water, iron powder and other easily conductive substances. If for various reasons into the water, please immediately disconnect the power and contact the maintenance personnel until the screen body display board dry before use.
05. Do a good job of cleaning and maintenance
LED display surface can be wiped with alcohol, or use a brush, vacuum cleaner for dust removal, not directly with a wet cloth. Do a good job of cleaning and maintenance is also very necessary. If the display is exposed to wind, sun or dust for a long time, a period of time down, the screen may be a piece of dust, which needs to be cleaned in a timely manner to prevent dust, so as not to affect the viewing effect. When cleaning the screen also need to wipe as gently as possible to minimize the possibility of injury to the screen.
06. Regularly check whether the display is working properly
LED display need to regularly check whether the normal work, the line is not damaged. If not work to be replaced in a timely manner, the line is damaged to be repaired or replaced in a timely manner. LED display internal lines, non-professionals are prohibited from touching, to avoid electric shock, or cause line damage; if there is a problem, please shenzhen LED display manufacturers professionals to overhaul.
07. According to the LED display switching order of operation
Warmly recommend the correct switching order: first open the control computer so that it can operate normally and then open the LED display screen. First close the LED display, and then close the computer.
08. Reasonable arrangement of LED display rest time
It is recommended to reasonably arrange the rest time of the LED display, do not overwork. In the rainy season, the LED display at least one week to use more than once; other times of the month to open the screen at least once, lit more than 2 hours.
09. Avoid letting the display for a long time in the bright screen
Do not play for a long time in all white, all red, all green, all blue and other bright screen, so as not to cause excessive current, power line heating, LED lamp damage, affecting the service life of the display.
10. Do not arbitrarily cut off the power supply
Do not cut off the power supply at will, and do not frequently turn off and on the display power supply. Do not disassemble and splice the screen body without authorization!
Maintenance LED display is the need for continuous inspection, maintenance and maintenance to improve product life.