Stop Water Damage Now: The Best LED Display Screen Installation Tips

If the LED electronic display screen is used outdoors, it will face many challenges in various aspects. LED display screens will be affected by harsh weather conditions such as high temperatures, cold waves, strong winds, and rain. Without proper care in these areas, the safe operation of the display screen will be impossible to talk about. Today we will talk about how to install LED electronic display screens to prevent water leakage.

1、 Apply sealant to the back panel
Many friends, in order to save trouble, install outdoor LED display screens without adding a backboard or sealing glue on the backboard. Over time, electronic components will inevitably get wet, and over time, LED display screens will have problems. And electronic components are most afraid of water. Once water enters the circuit, it will inevitably cause the circuit to burn out. These problems that can be easily solved cannot be ignored.

2、 Leakage outlet
If the LED electronic display screen is tightly integrated with the backboard, a leak hole must be installed underneath; The so-called leakage port is used for water leakage. No matter how tightly the front and back of the LED display screen are combined, for years, there is still more or less water inside. If there is no leakage hole at the bottom, over time, more and more water will accumulate. If a leakage hole is drilled, water will flow away, which can play a good waterproof role and also be beneficial for extending the service life of the LED display screen.

3、 Suitable route
When installing LED display screens, it is necessary to choose appropriate wires for the plug wiring. Generally, the principle of choosing larger than smaller should be followed, which is to calculate the total wattage of the LED display screen and choose slightly larger wires. It is best not to choose wires that are just right or too small, as this can easily cause damage to the wiring and affect the safe operation of the LED display screen.