At present, the rapid development of various industries, the demand for LED display has become higher and higher, in the LED display is widely used today, you know the way to use the LED display well? The following
LED Controller Store to talk with you about how to play with the LED display!
1, should promptly check the LED display lines, switches, etc., to ensure that the switch remains dry, to avoid leakage, electric shock and other events.
2, you can use the air conditioning dehumidification function of the LED display dehumidification, placing desiccant and other physical moisture absorption methods to keep dry, prevent the display from moisture.
3, in the rainy season, LED screen display to be used at least once a week or more, each time lit more than 2 hours, so as to avoid long time not to use the line moisture damage leakage.
4, proper indoor ventilation, you can let the water vapor attached to the display quickly evaporate, reduce the humidity of the indoor environment. Note: Do not ventilate in some windless, humid weather, otherwise it will aggravate the indoor humidity, resulting in LED display moisture.
5, the complexity of the outdoor environment, LED display will inevitably have the phenomenon of water seepage of the box. In addition to the above measures to deal with, usually need to regularly check the box waterproof rubber ring whether there is aging, deformation, mutilation; Seal box screws or locks are easy to loose and pressure is not enough.
6, leasing indoor LED display in outdoor use, to be prepared in advance of the rain cloth, encounter rainy days must first immediately power off, if not in a hurry to dismantle the screen, then use the rain cloth quickly cover, to be sunny day to take the box out to dry. If you encounter persistent rain, you have to open the back cover of the box, use the fan to open the cold air blow dry. Then put it in a ventilated and dry room for more than 8 hours. Lower the brightness of the display and ensure that the screen is lit for more than 4 hours, the electronic components in the moisture fully emitted.
7, if the LED display is not in use for a long time, should be frequently energized maintenance debugging, whether it is indoor LED display or outdoor LED display, long time not in use, and then start is likely to appear dead and blind spot. So it is very necessary to frequently energize and light up the screen body debugging.
