Full-color led display in the daily use of the top ten maintenance methods
1, keep the full-color led display screen using the environment of humidity, do not let anything with the nature of moisture into your full-color led display screen. Adding electricity to a full color LED display screen that contains humidity will cause the full color display parts to corrode and then cause permanent damage.
2, to avoid the problems we may encounter, we can choose passive protection and active protection, try to full color display screen may cause harm to the items away from the screen, and clean the screen as gently as possible to wipe, minimize the possibility of injury.
3, LED full-color display screen and our users the closest relationship, do a good job of cleaning and maintenance work is also very necessary. Prolonged exposure to the outdoor environment wind, sun, dust and other easy to show dirty, a period of time down, the screen is certainly a piece of dust, which needs to be cleaned in a timely manner in order to prevent dust for a long time wrapped around the surface to affect the viewing effect.
4, requires a stable power supply, and good grounding protection, do not use in poor natural conditions, especially strong lightning weather.
5, the screen body is strictly prohibited into the water, iron powder and other easily conductive metal objects. LED display screen as far as possible placed in a low-dust environment, large dust will have an impact on the display effect, while too much dust will cause damage to the circuit. If for various reasons into the water, please immediately power off and contact maintenance personnel until the screen body display board dry before use.
6、Switching sequence of LED display:
A: first open the control computer so that it can operate normally and then open the LED display screen.
B: First close the LED display, and then close the computer.
7, do not play for a long time in all white, all red, all green, all blue and other full bright screen, so as not to cause excessive current, power line heating, led lamp damage, affecting the service life of the display. Do not disassemble, splicing screen body!
8, it is recommended that the LED screen rest time is greater than 2 hours a day, in the rainy season led screen screen a week at least use more than once. Generally open the screen at least once a month, light up more than 2 hours.
9, full-color led display screen surface can be wiped with alcohol, or use a brush, vacuum cleaner for dust removal, not directly with a wet cloth.
10, full-color led display screen need to regularly check whether the normal work, line has no damage, if not work in time to replace, line has damage to timely repair or replacement. led display screen internal lines, non-professionals are prohibited from touching, in order to avoid electrocution, or cause damage to the line; if there is a problem, you should ask a professional for overhaul.
