CL LED Displays Power Supply 200W PAS2 series Features:
Input Parameter:
- Input Voltage Range: 90~264Vac
- Input Frequency Range: 47~63HZ(Typ 50/60)
- Max AC Current: <2.5A, 100Vac, full load
- Inrush current: ≤90A, 240V, Full load, 25℃
- PF >0.95(AC100~240Vac, full load)
- Leakage Current:I/P-O/P:≤0.25mA, I/P-F/G:≤3.5mA (Vin=250Vac 60HZ)
- Standby watt<5W
Output Parameter:
- Dc Voltage Range: 4.6 V(5V/4.2V is available too)
- Output voltage adjustment range: DC 4.5~4.7V
- Output Current: : 90-175Vac, 20A( NO Auxiliary heat sink), 176-264Vac, 30A( NO Auxiliary heat sink), 90V-175Vac, 30A( installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel), 176-264Vac, 40A(installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel)
- Max power:184W
- Ripple & Noise: ≤150mVp-P(@220Vac, rated load,25℃)
- Efficiency (Typ): ≥88%(Typ 90.5%) input Voltage: 230Vac, Rated load,25℃; ≥86%(Typ 88.5%,input voltage: 115Vac, Rated load,25℃
- Output Risetime<50mS
- Power on delay time<3S
- Voltage Tolerance:±2%
- Line Regulation: ±1%
- Load Regulation:±2%
Protection:
- Over voltage protection: 5-5.5V
- Over current protection: 50-70A
- Over temperature protection: 65-85℃, full load 25℃.
- Short circuit protection,Hiccup mode, recovers automatically after fault condition is removed
Safety Standards:
- UL60950, IEC/EN60950, GB4943.1-2011
EMC:
- FCC Part 15 B,EN55022(CISSPR22)ClassB,EN61000-3-2,EN61000-3-2
EMI:
- EN61000-4-2,3,4,5,6,8,11,Surge Vcom: ±2kV VDiff: ±4kV
- Hi-pot: I/P-O/P: 3.0KVAC/ 10mA/ 60S , I/P-FG:1.5KVAC/ 10mA/ 60S , O/P-F/G: 500Vdc/10mA/ 60S
- Isolation Resistance:I/P-O/P:≥10MΩ@ 500Vdc,I/P-F/G:≥10MΩ@ 500Vdc,O/P-F/G:≥10MΩ@ 500Vdc
- Leakage current: I/P-FG: ≤3.5mA , I/P-O/P:≤0.25mA (240Vac/60Hz)
Others:
- Working Temperature:‘-20℃ ~ +70℃
- Working Humidity:5%~90%RH
- Storage temperature: -40℃~+80℃
- Free air convection
- Dimension (L*W*H): 210*30*25mm
- Carton Dimension: 40*31*18.5 cm
- Packing: 0.3KG/16.5KG/0.04CBM/CTN
- MTBF:100K hours (MIL-HDBK-217F (25℃ )
- 3 years warranty