LED electronic display screen maintenance way
We all know very well that LED products belong to electronic products, then as long as they belong to electronic products will need to maintain the time, especially after a period of time or occasional failure, is the need to display the box or module to do maintenance, repair work. So what are the usual electronic display maintenance methods, and what kind of difference do they have? Below to explain.
Generally speaking, it is mainly divided into the maintenance mode before and after the maintenance of two kinds of maintenance, first of all in the understanding of the difference between the two maintenance methods, we have to make clear that the maintenance mode and the LED display installation and configuration mode is inseparable. The conventional LED display installation is mainly divided into: wall-mounted installation, inlay installation, roof installation and column installation, etc. .......
1, before the maintenance: before the maintenance of the biggest feature lies in the very space-saving, for indoor or wall-mounted installation of the structure, space-saving is extremely important, because it will not leave too much space as a maintenance channel. So the front maintenance can greatly reduce the overall thickness of the LED screen structure, which can be well combined with the surrounding architectural environment, but also in order to ensure that the effect of space saving at the same time. However, this structure has some high requirements for the equipment, that is, its heat dissipation function will be very high requirements.
2, after maintenance: the benefit of after maintenance is flexible and convenient, this side of the advantage is suitable for large outdoor LED display as well as rooftop inspection and maintenance is simple and convenient. For those large LED display screen installed on the exterior wall of the building, from the rear is more convenient for maintenance personnel to enter and operate. According to the above description, Liheli Lai for different application environments and practical needs in order to better and faster to solve the problem of LED display failure.
