Novastar MRV266 LED Receiving Card MRV266 Small-Pitch LED Display Controller
$25.00 Regular price $35.00
Type: LED Receiving Card
Novastar MRV266 LED Receiving Card
The MRV266 is a small-pitch receiving card from Nova Technology. The single card has a maximum load of 512 × 256 pixels and supports up to 24 sets of RGB parallel data. Adopts 6 HUB320 (26pin) interface, with high stability and high reliability, suitable for a variety of environments.
The hardware design and software design of the MRV266 takes into account the scenarios of user deployment, operation, and maintenance, making deployment easier, more stable, and more efficient.
- Improve display
With NovaLCT and NovaCLB, the brightness of each lamp point
Corrected with chromaticity.
fast bright and dark line adjustment
Quickly bright and dark line adjustment on NovaLCT to eliminate
A gap between the light board and the light board, the box body and the box body.
With independent masters that support 3D capabilities, at NovaLCT or
Turn on the 3D function on the operator panel of the main control and set the 3D parameters.
The number causes the display screen to display a 3D effect.
− 256×256 (PWM IC)
− 256×208 (General Purpose IC)
- Improve maintainability
Target box after enabling Mapping on NovaLCT
The receiving card number and network port information will be displayed, which can be clearly obtained.
Receive card location and routing method.
Receive card pre-stored screen settings
The specified picture can be set to the display on NovaLCT
The screen when the startup screen, network cable is disconnected, or when there is no video source signal.
Temperature and voltage monitoring
Can monitor its own temperature and voltage without the need for other peripherals,
The temperature and voltage of the receiving card can be viewed on the NovaLCT.
Supports Nova's universal 5pin LCD module. For display connection
Card temperature, voltage, single run time and total run time
With NovaLCT (V5.2.0 and above), the receiving card is connected
During the communication, the data loss on the transmission link is monitored.
Firmware program readback
Can read back the receiving card on NovaLCT (V5.2.0 and above)
The firmware program is saved to the local.
Configuration parameters read back
Readback card configuration parameters can be read back and saved on NovaLCT
Go to the local.
- Improve reliability
Increase the reliability of the series connection of the receiving card through the master-slave redundancy mechanism.
In the standby line, when one of the lines fails, the other
A line will work instantly to ensure that the display is working properly.
Configuration parameters dual backup
Save two receiving card configurations on the receiving card via NovaLCT
Parameters, one of which is used as a backup parameter.
Dual program backup
The receiving card is shipped with two applications saved in case the program is more
The upgrade caused by the new exception is stuck.
Novastar MRV266 LED Receiving Card Appearance
|Electrical Specifications||Input voltage||DC 3.3V~5.0V|
|Rated power consumption||2.5W|
|working environment||Operating temperature||`-20℃~+70℃|
|Storage temperature||10%RH~90%RH No condensation|
|Physical specification||Dimension||138.9 * 66.4 * 17.2(mm)|
|Certification Information||Passed RoHS certification|
Novastar MRV Series LED Receiving Card MRV226 Specification