CL LED Displays Power Supply 400W PAS2 series Features:
Input Parameter:
- Input Voltage Range: 90～264Vac
- Input Frequency Range: 47～63HZ(Typ 50/60)
- Max AC Current: <7.0A, 100Vac, full load
- Inrush current: ≤30A, 240V, Full load, 25℃
- PF >0.95(AC100~240Vac, full load)
- Leakage Current:I/P-O/P:≤0.25mA, I/P-F/G:≤3.5mA (Vin=250Vac 60HZ)
- Standby watt<9W
Output Parameter:
- Dc Voltage Range: 5.0V (4.5V is available too)
- Output Current: : 100-175Vac, 40A( NO Auxiliary heat sink), 176-264Vac, 60A( NO Auxiliary heat sink), 90V-175Vac, 60A( installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel), 176-264Vac, 80A(installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel)
- Max power:184W
- Ripple & Noise: ≤150mVp-P（@220Vac, rated load,25℃）
- Efficiency (Typ): ≥90%（Typ 92.5%) input Voltage: 230Vac, Rated load,25℃; ≥89%（Typ 91.5%,input voltage: 115Vac, Rated load,25℃
- Output Risetime<50mS
- Power on delay time<3S
- Voltage Tolerance:±2%
- Line Regulation: ±1%
- Load Regulation:±2%
Protection：
- Over voltage protection: 6.3V
- Over current protection: 100-140A
- Over temperature protection: 65-85℃, full load 25℃.
- Short circuit protection,Hiccup mode, recovers automatically after fault condition is removed
Safety Standards:
- UL60950, IEC/EN60950, GB4943.1-2011
EMC：
-
FCC Part 15 A,EN55022(CISSPR22) ClassA, EN61000-3-2, EN61000-3-2
EMI:
- EN61000-4-2,3,4,5,6,8,11,Surge Vcom: ±2kV VDiff: ±4kV
- Hi-pot: I/P-O/P: 3.0KVAC/ 10mA/ 60S , I/P-FG:1.5KVAC/ 10mA/ 60S , O/P-F/G: 500Vdc/10mA/ 60S
- Isolation Resistance:I/P-O/P:≥10MΩ@ 500Vdc,I/P-F/G:≥10MΩ@ 500Vdc,O/P-F/G:≥10MΩ@ 500Vdc
- Leakage current: I/P-FG: ≤3.5mA , I/P-O/P:≤0.25mA (240Vac/60Hz)
Others:
- Working Temperature:‘-20℃ ～ +70℃
- Working Humidity:5%～90%RH
- Storage temperature: -40℃～+80℃
- Free air convection
- Dimension (L*W*H): 250*45*26mm
- Carton Dimension: 40*31*18.5 cm
- Packing: 0.8KG/20PCS/17.5KG/0.02CBM/CTN
- MTBF:150K hours (MIL-HDBK-217F (25℃ )
- 3 years warranty
